How does a Tower Crane Work

 Introduction to Instant Gas Geyser 

We all use hot water in our washrooms and kitchens.Have you ever wondered what heats the water in our washrooms and kitchens?you know we use geysers for heats the water.

In today's we talked about following things

1. ·        What is instant gas geysers?

1. ·        What is its internal structure and

1. ·        How does it heat water instantly?

What is Gas Geyser?

Tankless or on-demand gas water heaters, commonly referred to as instant gas geysers, are devices that heat water just when it is required, rather than keeping it in a tank. In contrast to conventional gas water heaters, which keep a steady supply of heated water in a tank, immediate gas geysers heat the water as it flows through the appliance.

A flow sensor in the quick gas geyser detects the water when hot water is needed and sets off the gas burner's ignition. In order to provide hot water on demand, the heat exchanger quickly warms the water as it goes through. This implies that without a storage tank, quick gas geysers may produce an almost limitless supply of hot water.

Instant gas geysers are common in homes and businesses when there is a variable and erratic demand for hot water due to their higher energy efficiency than conventional gas water heaters. Due to their smaller size and lower maintenance requirements compared to tank-based water heaters, they are a preferred alternative in many places.

Construction Of Gas Geyser:

Outer look of Gas Geyser?

Here you see three buttons

1.     One controls the gas flow

2.     The other controls the flow of water.

3.     The middle button is used to set your weather.

Internal structure of Gas Geyser?

There are three pipes connection with gas gayser.

• ·        Gas inlet pipe inside it.
• ·        There is a cold water inlet pipe.
• ·        Third hot water outlet pipe.

·        Process of Burning Gas:

In The process of burning gas, a fan is fitted to give air. Flow sensors are installed to detect cold water flow. Heat Exchange heats water with gas heat. A temperature sensor is installed to monitor the temperature of the hot water and they are all controlled by an electronic controller.

Working Principle of Instant Gas Geyser?

The geyser is first turned on with the help of electric supply then gas enters the geyser then cold water enters the geyser then the flow sensor signals the control module the controller turns on the fan and then the gas valve When it opens, the gas enters the burner, then the controller turns on the igniter and thus the fire starts.

The cold water in the heat Exchanger of this fire is heated by passing it through various tube pipes and then the hot water comes out.The temperature sensor then notes the temperature of the water and sends it to the controller. If the water temperature is lower than the set temperature it turns on more Burners so that the water is heated as per your requirement.

The hot water comes out of the geyser into your hot water tab which you can use.The geyser does not stay on all the time. It only turns on when you open the hot water tab. When the flow sensor sends a signal to the controller then the controller turns on the fan and opens the gas valve then after the gas reaches burner, the controller turns on the igniter, thus the water gets hot due to the auto function of geyser.

Gas is used only when you use hot water. This process saves gas. Due to its function it is becoming very popular.If it is winter then the water temperature is lower than you have to heat the water more than for that you have to burn more burner.

It is summer then the water temperature is higher than you have to heat water less then you have to burn less burner. Less gas burns than this. Water is heated more.